Eisenbahn-Bildschirmschoner-Wiki

The vehicle movements or short movements are the most important lines in most Traffic - timetables. They describe what kind of vehicles move across the screen.

The most important part of a movement in general, that without which it can not work at all, is the part where the vehicles themselves are stated. A movement works, if only this part is present.

The syntax is

C=<Train>

where <Train> symbolizes the vehicles used. Here, entries from the vehicle list, macros or image files can be used directly. Example:

<Code>C=BR220A</code>

In this particular example, a german Federal Railroad V200 would roll across the screen.

Several different vehicles are separated by commas.

C=BR220A,DB_3B4NB59BC,DB_AB4NB59,DB_MPW4YG57

The vehicles normally run in the order in which they appear in the line: the first vehicle (the V 200) ahead, the last (the makeshift MPw4yg-57) on the train.

The Asterisk (*) serves also in traffic of the multiplication, in this case the multiplication of vehicles. A number with *, written in front of a vehicle entry, causes this vehicle to appear as many times as indicated by the number.

 C=3*BR220A 

This example would produce a locomotive of three V200.

It is also possible to leave the exact number of vehicles used to chance and to specify in which area the number should be located.

C=1-3*BR220A

The entry in front of the star says here that one to three V 200 should run in this train. The hyphen (-) thus expresses “to”.

C=1|3*BR220A

The vertical bar (|) symbolizes “or”. In plain English this means that either one or three V 200 form this train. Also several numbers are possible here …

C=1|3|5*BR220A

… or a combination with “to”.

C=1|4-6*BR220A

Of course, a combination is possible. Example:

C=BR220A,2*DB_3B4NB59BC,DB_AB4NB59,DB_MPW4YG57

The 2nd class silverling now runs twice in a row without having to be entered twice.

The particular benefit of this number is shown by really long trains from many identical cars.

C=2*BR220A,30*DB_OOT50

With a simple command, 30 self-unloaders are quickly hanged behind a double-action V200.

Even groups can be used several times in succession. As in mathematics, brackets are used here.

C=BR220A,2*(DB_3B4NB59BC,DB_AB4NB59)DB_MPW4YG57

Now the area in the bracket is repeated, so the two pieces of silver. Of course, the number can be chosen freely.

C=BR220A,1-5*(DB_3B4NB59BC,DB_AB4NB59)DB_MPW4YG57

Possible is also the zero; she is mentioned here because she would be pointless on a train made up of only one type of vehicle.

C=BR220A,DB_3B4NB59BC,DB_AB4NB59,0*DB_MPW4YG57

The makeshift van would disappear now, although he is registered in the movement.

C=BR220A,DB_3B4NB59BC,DB_AB4NB59,0|1*DB_MPW4YG57

This will cause some trains to have a temporary van, others not because it will be attached either zero or once.

It is also possible to nest details of vehicle numbers in groups. In this case, a vehicle or a sub-vehicle group is provided with a number in a limited by a bracket vehicle group. Of course, it can also be multiple vehicles or subgroups.

C=BR220A,2*(2*DB_3B4NB59BC,DB_AB4NB59)DB_MPW4YG57

The group of two silver lines 2nd class and a Silberling 1./2. Class is now twice in the train.

C=BR220A,2*(DB_3B4NB59BC,0-2*DB_AB4NB59)DB_MPW4YG57

In this case, the twice repeated wagon group with the silver coins sometimes contains a wagon 1./2. Class, sometimes two, sometimes none at all.

Not only the number of vehicles can be determined at random, but also the vehicles themselves. As with the number of vehicles, here too the vertical bar (|) is used as an “or” symbol to separate vehicles to be selected.

C=VT10_001|VT10_002|VT10_003

With only one movement line, three different freight cars are shown here, either VT 10 001 or VT 10 002 or VT 10 003.

The random selection of vehicles also works in trains with other vehicles.

C=VT10_001|VT10_002|VT10_003,DRG_LEIG3

Now the freight cars pull a Leig unit behind them. This example also shows the hierarchy: The concatenation comma is higher than the “or” character. If you want to drive only the VT 10 003 with a Leig unit, so either VT 10 001 or VT 10 002 or a train from VT 10 003 and the Leig unit would have to use brackets and him with the Leig unit to a group sum up.

C=VT10_001|VT10_002|(VT10_003,DRG_LEIG3)

This example also shows that vehicle groups can be entered in a random selection in addition to individual vehicles. These groups can also come about through repetitions.

C=SBB_721,(2*SBB_6016A)|SBB_CC5701G

Here, the Swiss electric railcar pulls either two single platform cars or a double car.

Of course, any number of random choices are possible in the same move.

C=VT10_001|VT10_002|VT10_003,DRG_LEIG3|DRG_LEIG3L

Incidentally, the OR function can also be limited to parts of the vehicle name, which may make a line considerably more compact under certain circumstances.

C=VT10_00(1|2|3),DRG_LEIG3(|L)

The names of the three freight cars differ only in the number at the end, so only these are selected at random. In turn, one of the two Leig units is shown from the left, so that an L can be added at random. By the way, in the last example it is important that the option not to append a letter is the first in the lineup. You will probably need them quite often in timetables.

Interesting is the random selection, if randomly selected vehicles are repeated.

C=BR216R~FA,10-20*DB_FANS126|DB_FANS126VR

In this example, which is fully advertised for ease of understanding, runs behind an Orientroten 216 ten to twenty times either a brown or a traffic red side tipper. If, however, you want to drive art-pure trains with one and the same vehicle, the multiplication sign is not * but @.

C=BR216R~FA,10-20@DB_FANS126|DB_FANS126VR

Now either all side tippers are brown or all side tippers are red.

If you now apply all these possibilities and those of further nesting abundantly, you can come to relatively short entries to amazing results.

C=DR_52_80A|DR_V200(A|B)(|L)15-25*DR_FAL6556((A|B|C|D)|(A|B|C|D|E)H)(|L)

As a locomotive either a Reko-52 ⁸⁰ or a V 200 “Taigatrommel” is used this turn. The latter are available in two versions (DR_V200A and DR_V200B) as well as from left (with L) and right (without L). Behind them are 15 to 25 self unloaders Fal 6556 of the DR in different states. The variant with brakeman's platform is available in four versions (DR_FAL6556A, DR_FAL6556B etc.), with brakeman's cab in five designs (DR_FAL6556AH, DR_FAL6556BH etc.), and all from left and right. This means that not only two random selections are strung together, but in the first, several random selections are nested in two levels.

Normally trains are put together in traffic from front to back in the order in which they are written. However, this is not always desirable, for example in Wendezügen or railcar units.

C=DB_628_201A,DB_628_201B

In this example, the two-part railcar always precedes with the control car (DB_628_201A), because this is registered as the first vehicle. However, if the train goes to the right, this does not work because the control car does not turn around in the direction of travel.

This could be circumvented by indication of direction of travel, ie by letting the train drive in one direction only and reversing it in the other direction. Significantly more elegant, simpler and less space-consuming, however, is to specify that the train should not be formed from the front to the rear, but from left to right, i. E. The vehicle written first does not run in the direction of the train at the very front, but on the leftmost screen. For this purpose, a small sign (<) is set in front of the vehicles as an arrow to the left.

C=<DB_628_201A,DB_628_201B

It is also possible to make a move from right to left, but there is the greater sign (>), which acts like an arrow to the right.

C=>DB_628_201B,DB_628_201A

Not only whole trains can be so affected in the sequence, but also train parts, for example, when this railcar unit is biased a locomotive. Of course, this should not run in one direction at the rear, but always before the train.

C=DBAG_218212,(<DB_628_201A,DB_628_201B)

Here only the vehicles in the bracket are ranked from left to right. The small character is the first character in the bracket and has only influence on the vehicles in the bracket.